|
|
|
Home - Resources
- GMC Recalls
- 1989
GMC Recall Lookup
Many vehicles have GMC "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices announced by the NHTSA for your vehicle, please enter the appropriate
year and model.
1989 Mazda Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 09E012000
Component: EXTERIOR LIGHTING
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 16270
Year: 1989
Make: Mazda
Model: B2000
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2009-04-07
Summary:
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E049000
Component: EXTERIOR LIGHTING
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 27176
Year: 1989
Make: Mazda
Model: Pickup
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-05-24
Summary:
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E026000
Component: EXTERIOR LIGHTING
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 61944
Year: 1989
Make: Mazda
Model: Pickup
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-03-23
Summary:
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V173000
Component: SEAT BELTS:FRONT:WEBBING
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 17800
Year: 1989
Make: Mazda
Model: Rx7
Manufactured
from: 1988-12-24
to: 1991-05-31
Recall Date: 1996-09-16
Summary:
THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.
IN THE EVENT OF A VEHICLE COLLISION, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY.
DEALERS WILL REPLACE INOPERATIVE SHOULDER BELTS. MAZDA HAS EXTENDED THE WARRANTY COVERAGE ON THE DRIVER AND PASSENGER AUTOMATIC SHOULDER BELT RAIL AND MOTOR FOR THE LIFE OF THE VEHICLE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103005
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 360433
Year: 1989
Make: Mazda
Model: Mx6
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103005
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 360433
Year: 1989
Make: Mazda
Model: 323
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103005
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 360433
Year: 1989
Make: Mazda
Model: Mpv
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103005
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 360433
Year: 1989
Make: Mazda
Model: 929
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V174000
Component: STRUCTURE:BODY:DOOR
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 244000
Year: 1989
Make: Mazda
Model: 929
Manufactured
from: 0000-00-00
to: 1991-08-31
Recall Date: 1993-10-29
Summary:
RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.
INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE.
DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V174000
Component: STRUCTURE:BODY:DOOR
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 244000
Year: 1989
Make: Mazda
Model: 626
Manufactured
from: 0000-00-00
to: 1991-08-31
Recall Date: 1993-10-29
Summary:
RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.
INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE.
DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93E035000
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 300
Year: 1989
Make: Mazda
Model: Mx6
Manufactured
from: 1991-09-01
to: 1992-03-01
Recall Date: 1993-10-13
Summary:
THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.
IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE.
MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93E035000
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 300
Year: 1989
Make: Mazda
Model: 626
Manufactured
from: 1991-09-01
to: 1992-03-01
Recall Date: 1993-10-13
Summary:
THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.
IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE.
MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V161000
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 29824
Year: 1989
Make: Mazda
Model: Mpv
Manufactured
from: 1988-07-01
to: 1989-06-01
Recall Date: 1991-09-11
Summary:
WHEN APPLYING THE FOOT (SERVICE) BRAKE IN THE LOW VEHICLE SPEED CONDITION, THE BRAKING POWER PRODUCED MAY BE MORE THAN EXPECTED.
THE UNEXPECTED BRAKING POWER COULD RESULT IN REAR BRAKELOCKUP AND THE VEHICLE BECOMING DIFFICULT TO CONTROL.
REPLACE BRAKE SHOE ASSEMBLY WITH IMPROVED ASSEMBLY.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V013000
Component: SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 6680
Year: 1989
Make: Mazda
Model: Mpv
Manufactured
from: 1989-02-01
to: 1989-05-01
Recall Date: 1991-01-22
Summary:
WHEN THE VEHICLE IS EXPOSED TO TEMPERATURES BELOW 5 DEGREES FAHRENHEIT (-15 DEGREES C), THE NEUTRAL DETERGENT USED AS AN ASSEMBLY LUBRICANT MAY STICK TO THE CHECK VALVE, PREVENTING VALVE FROM FUNCTIONING.
THIS COULD CAUSE AN INOPERATIVE BRAKE POWER ASSIST WHICHDESCREASES BRAKING ABILITY, AND PRESENTS A POTENTIAL FOR AN ACCIDENT.
REPLACE VACUUM HOSE ASSEMBLY.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 89V194000
Component: SEAT BELTS:FRONT:ANCHORAGE
Manufacturer: MAZDA NORTH AMERICAN OPERATIONS
Potential Number of Units Affected: 10587
Year: 1989
Make: Mazda
Model: Mpv
Manufactured
from: 1988-07-01
to: 1988-11-01
Recall Date: 1989-11-07
Summary:
THE CENTER SAFETY BELT ATTACHMENT HARDWARE BRACKETS FOR THE THIRD SEAT MAY NOT WITHSTAND THE SPECIFIED TENSILE LOAD.
VANS WOULD NOT COMPLY WITH FMVSS 210
REPLACE SAFETY BELT ASSEMBLIES WITH BRACKETS.
|
As a new car dealer, Vaden Automotive is authorized to sell GMC Service Contracts by the General Motors Protection Plan (GMPP).
Vaden Automotive - 9393 Abercorn Street - Savannah, GA 31406
Service Contract Sales 1-877-466-9166
|
|
|
